[email protected] • 813.978.3700
- 7 -
Install Fixture to Junction Box
7
Remove the cover from the junction
box by loosening the screws. Place
the fixture supply wires into the
junction box.
Thread the junction box onto the
bottom of the fixture and hand
tighten until snug.
Fixture
Junction Box
Supply Wires
Screw
Cover
Install Junction Box to Stake
8
Pass the main supply cable into
the junction box. Place the cap
back onto the stake and secure
with the previously removed
screws. Tighten until snug with a
screwdriver.
Main Supply Cable
Junction Box
Cap
Screw
Stake
Conduit
* Junction Box is not
provided by VOLT®
* Junction Box is not
provided by VOLT®
