2
• Never allow battery acid to come in contact with this unit.
• Do not operate this unit in a closed area or restrict ventilation in any way.
FIRST AID – SKIN:
If battery acid comes in contact with skin, rinse immediately with water, and then wash thoroughly with soap and water. If redness, pain, or
irritation occurs, seek immediate medical attention.
•
FIRST AID –EYES:
If battery acid comes in contact with eyes, flush eyes immediately, for a minimum of 15 minutes and seek immediate medical attention.
PRODUCT FEATURES
•
Using state of the art technology, the battery Charger with 5 steps enables the re-charging of Batteries to almost 100% of their original capacity.
•
Automatically diagnose, recover, charge and maintain batteries for months, fully automatic operation from Charge to Maintenance modes.
•
Three output options are available – 24V , 12V and 13.6V/5A Power Supply.
•
Different charging current 2 / 5 / 10 A
•
Supplied with two detachable and interchangeable color coded lead sets one with clamps for bench charging and one with eyelet terminals
for permanent attachment to the battery posts to allow quick connection/disconnection through connector.
•
No risk of over charging
•
Electronically safe against user error
•
Spark proof
•
Over heat protection with mini cooling fan inside
•
Full protected against short circuit and wrong connections
•
Works as power generator ( 13.6V/5A)
OPERATION INSTRUCTIONS
1.
Connecting the terminal rings/clamps directly to the corresponding connectors on the battery posts.
Note:
Make sure correct polarity connection before plugging in the AC power.
•
Position the RED terminal on the POSITIVE post connector
•
Position the BLACK terminal on the NEGATIVE post connector
2.
Connect the AC power cord with the AC power outlet.
•
The Power LED indicator turns on after the connection.
•
The charger will automatically select the right voltage according to the battery voltage type and the corresponding LED indicator will turn on.
Settings
14.4V
14.7V
28.8V
29.4V
SYMBOL
Press Mode button 2 to 3 seconds to enter
*
for charging AGM batteries and in sub-zero temperatures.
•
The Error LED indicator will turn on for incorrect polarity/Faulty.
