2
•
FIRST AID
– SKIN:
If battery acid comes in contact with skin, rinse immediately with water, and then wash thoroughly with soap and water. If redness, pain, or
irritation occurs, seek immediate medical attention.
•
FIRST AID
–EYES:
If battery acid comes in contact with eyes, flush eyes immediately, for a minimum of 15 minutes and seek immediate medical attention.
PRODUCT FEATURES
•
Using state of the art technology, the charger with 6 steps enables the re-charging of Batteries to almost 100% of their original capacity.
•
Automatically diagnose, recover, charge and maintain batteries for months, fully automatic operation from Charge to Maintenance modes.
•
Six output options are available - 28.8V, 29.4V, 14.4V, 14.7V, 13.6V Supply and 16V Boost.
•
It features a 9-Stage charging strategy, i.e. Pulse Charge, 6A, 4A, 3A, 2.5A, 1.5A, Boost Charge, Maintenance & Power Supply.
•
Supplied with two detachable and interchangeable color coded lead sets one with clamps for bench charging and one with eyelet terminals
for permanent attachment to the battery posts to allow quick connection/disconnection through connector.
•
No risk of over charging
•
Electronically safe against user error
•
Spark proof
•
Over heat protection
•
Full protected against short circuit and wrong connections
•
Works as power generator ( 13.6V/4A)
•
Boosts deep discharged batteries (4.5V)
OPERATION INSTRUCTIONS
1.
Connecting the terminal rings/clamps directly to the corresponding connectors on the battery posts.
Note:
Make sure correct polarity connection before plugging in the AC power.
•
Position the RED terminal on the POSITIVE post connector
•
Position the BLACK terminal on the NEGATIVE post connector
2.
Connect the AC power cord with the AC power outlet.
•
The Power LED indicator turns on after the connection.
•
The charger will automatically select the right voltage according to the battery voltage type and the corresponding LED indicator will turn on.
14.4V/6A
14.7V/6A
28.8V/3A
29.4V/3A
(Press Mode button to select
*
for charging in cold conditions and AGM batteries)
•
The Error LED indicator will turn on for incorrect polarity/Faulty.
Reverse polarity hook up
ON
Bad batteries cannot be recharged
Flashing for 12V batteries
Flashing for 24V batteries
•
Rated maximum 6A charging current for 12V batteries;
