
40
21.
Trouble shooting and repair
Have your power tool serviced by a qualified repair person using only identical parts for replacement.
This will ensure the safety of the power tool.
Issue
Possible cause
Solution
Pruners doesn’t work
Incorrect connection
Check
correct
wire
connection with the tool
and the battery.
Check the switch to be in
ON position.
Switch fail
Send shear to service
center for repairing
Blade becomes hot
Blunt blade
Sharp or replace blade
Damaged blade
Sharp or replace blade
Insufficient lubrication
Lubricate the blade
Bad cutting surface
Friction force added
Lubricate the blade
Blade is dirty
Clean blade
Blunt blade
Sharp or replace blade
Incorrect usage of the
pruner
Read instruction carefully
Battery charge is low
Charge the battery
Can’t charging, red LED
flash
Battery not correctly insert
in the charger
Re-insert the battery to
charger
Charger
not
correctly
connected to power
Re-connect the charger
Battery poles are dirty
Clean the poles
Battery failure
Replace battery
Charger fail
Replace charger
Summary of Contents for KV500
Page 124: ...124 ...