Pag. 32 di 40
•
Press and hold the trigger for two seconds. After an acoustic signal - blades
open at about 70%.
•
Press and hold the trigger for two seconds. After an acoustic signal - 100%
blade opening.
14.
Maintenance and cleaning
Tools to be repaired must be sent to Customer Assistance Service. Use
original part keeps the tool good condition and safe.
Disconnect the battery from the tool before checking, maintaining and
repairing the pruning shear, to avoid risk of unexpected activation of
the tool.
Warning!
In particular situations of very hard use, the blade and the handle could reach high
temperatures. It is recommended to handle the pruner with care, using protective
gloves.
Please wear glove before you check the blade is sharp or not, that is to
avoid blade hurt you. Check the pruning shear frequently, this will keep
tool safe and reliable.
•
Do not flush the tools or put it in water, it will cause short circuit or damage
the device.
•
Keep ventilation, motor and handle cleaning, always use feather clean the
device. Do not use cleanser flush device, it will rust parts.
•
Clean the blade after every use, protect by oil or spray protection.
•
After continuous work for 8 hours, please open the trigger cover protection
of the equipment and clean up wood chips and other impurities