Vollrath Stoelting CC202W, Operator'S Manual, Page: 27 / 39

Typical Machine Settings
Note: Please use these settings as guidelines. Each machine may vary and should be set up for
highest efficiency, best quality, and preferred product texture. Space has been provided for
inputting the final settings after set up
Hopper Temperature Control
(Location within machine)
Note: Temperature settings may be adjusted
for your particular requirements.
Ranco ETC 111000- One stage controller:
Factory Settings Your
Settings
F/C:
F ________
Temp:
38 ________
Diff: 1 degree ________
Mode:
CL ________
Hold Cycle Temperature Control
(Location within Machinery Electrical Box)
Note: Temperature setting may be adjusted
for your particular settings.
Option #1 (If your unit is equipped with
Ranco ETC 2110002 2-stage controller)
Stage #1 Stage
#2
Factory Settings Your Settings Factory Settings Your Settings
F/C:
F _______ F/C: F _______
Temp:
0 _______ Temp: 38 _______
Diff 1:
1 degree _______ Diff 1: 1 degree _______
Mode:
C1 _______ Mode: C2 _______
Option #1 (If your unit is equipped with
Ranco ETC 2110002 2-stage controller)
Stage #1
Factory
Settings Your Settings
F/C:
F _______
Temp: 38 _______
Diff 1:
1 degree _______
Mode:
C1 _______