3
ENGLISH
O
peratOr
’
s
M
anual
NOTICE: Do not drop cooking utensils or other objects onto the
cooking surface. The strong, non-porous surface can
break. The warranty does not cover this type of abuse.
3. Press the ON/OFF button. The Power LED will illuminate. The
Induction Wok will default to power level 50 or the power level setting
the last time the wok was used.
The display window should remain constant during operation. If the
display is flashing, see the Troubleshooting section in this manual.
B
A
C
D
E
F
A
ON/OFF button -
Press to turn unit ON/OFF.
B
Power LED -
Illuminates when the power is switched on
C
Display panel -
Displays the power level.
D
Down button -
Press to decrease the power level.
E
Up button -
Press to increase the power level.
F
Turbo button -
Press to rapidly change the power to the highest
setting.
Adjusting the Power
1. Press the Up button or Down button to increase or decrease the power
level.
2. To rapidly set the highest power level (100) press the Turbo button.
Turning Off the Induction Wok
Press and hold the Power button until the Power LED is no longer
illuminated. The fan will run for approximately 10 minutes to help cool the
Induction Wok. The Display will show “HOT” until the heating surface has
cooled.
Over Heat Protection
The unit is equipped with an “over-heating protection” feature. If the
temperature of the heating surface becomes too hot, the unit will stop
heating. The display will flash “F2” to indicate the unit is in “over-heating
protection” mode. See Troubleshooting for more information.
c
leaning
WARNING
Electrical Shock Hazard.
Keep water and other liquids from entering the
inside of the unit. Liquid inside the unit could cause
an electrical shock.
Do not spray water or cleaning products. Liquid could contact the
electrical components and cause a short circuit or an electrical shock.
CAUTION
Burn Hazard.
Do not touch cookware, heating surface, food, or
liquid while heating.
Hot food and liquids can burn skin. Induction heating surfaces heat
very rapidly. Allow the heating surface to cool before handling.
To maintain the appearance and increase the service life, clean your
Induction Wok daily.
1. Unplug the unit and let it cool until the Display no longer shows “HOT.”
2. Wipe the exterior of the induction wok with a clean damp cloth.
NOTICE: Do not use abrasive materials, scratching cleansers or
scouring pad to clean the unit. These can damage the
finish.
NOTICE: Do not spray controls or outside of unit with liquids or
cleaning agents.
3. Thoroughly wipe off any mild soap or chemical cleaners. Residue
could corrode the surface of the unit.
