2500114-A
3
FOOD PROCESSOR
WARNING
RISK OF INJURY
Do not attempt to operate unit without all safety devises in place and operating
correctly.
WARNING
CUTTING HAZARD, SHARP EDGES
Cutting blades are sharp and will cause injury if not handled properly. To reduce
the risk of injury, the use of cut resistant gloves is recommended when cleaning
this unit.
Using the Food Processor:
Before using this equipment it must be cleaned thoroughly.
Clean all surfaces before
use
. Failure to clean surfaces before using the unit could cause food contamination.
1. Release cover locking lever and remove cover.
2. Add required ingredients into bowl.
3. Replace cover and lock in place using the locking lever.
4. Press the START button to begin processing food.
5. When ingredients are processed the desired amount, press the STOP button to
turn the unit off.
6. Release cover locking lever and remove cover.
7. Remove processed food.
NOTE:
If the safety interlock has been opened while the unit is on, the unit will not
start again unless the ON/OFF Switch is reset.
WARNING
ELECTRICAL SHOCK HAZARD
Do not spray outside of the unit or controls with liquid or cleaning product.
Do not immerse the cord, plug or base of the unit in water or any other liquid.
Liquid could enter the electrical compartment and cause a short circuit or
electric shock.
Cleaning:
1. Unplug the unit from power supply.
2. The processor bowl and cutter assembly are dishwasher safe. Handle cutter
assembly carefully; the blades are very sharp.
3. Wipe the base of the unit clean with a damp cloth and mild soap. Do not
immerse the cord, plug or base of the unit in water or any other liquid.
4. Wipe the unit dry with a clean cloth and ensure thoroughly dry before plugging
back into the electrical supply.
Repair:
There are no user serviceable parts within this food processor. To avoid serious injury
or damage, never attempt to repair or replace a damaged power cord yourself. Contact
a qualified professional repair service.
