The installation on the light pole
1.
First turn ON the switch;
2.
Set the light which has been assembled with the support base on the light
pole and adjust the direction;
3.
Screw with the M8 Cup head hex socket screws on the tube of the support
base;
4.
Tighten with a wrench and make the light firmly fixed on the light pole.
We have the right to improve the structure of our products without any special
notice. If there is anything different from the data here, kindly take note.
We guarantee that we have done what we can to improve the contents of the
instruction, so we will not assume any loss of this.
Item name
QTY(pcs)
Lamp system
1
Bolts
Cup head m8*30mm
9
Round head m8*30mm
9(Reserve 1PCS)
Support Base
1
Tool
2
Page
7
of
9
