CARE & MAINTENANCE
WARNING
• Always disconnect charge cable from bottle before use. Never fill bottle with charge cable
attached.
• Disconnect power cord before servicing.
• Do not insert items into unit. Doing so may cause damage or electric shock.
• Hand wash only. Do not use solvents or detergents to clean.
• No soaking. Never put the bottom part of the unit (battery, cable connection, power button) into water.
• If bubbles reduce in size and quantity, turn the unit off and pour white vinegar into bottle, about 1 inch above the titanium
plate. Allow to soak for 2 hours, and then shake for 2 minutes. Discard vinegar and thoroughly rinse the inside of the bottle.
Water Requirement —
Use only clean, potable water. Do not use water with minerals removed such as RO (Reverse Osmosis)
water. Never put anything except water in the bottle.
Before Use —
Wash the bottle using a small amount of mild dish soap if it’s the first use or if it has been sitting unused for a
long time.
Do not drink
from the bottle with the charge cable / power adapter connected.
Ambient Temperature —
Only use the unit where the ambient temperature range is 40°F ~ 110°F (4.44° C ~ 43.33° C).
Cleaning —
Only clean the bottle portion of the unit. Do not clean the base with water. Never clean the bottle with detergents or
solvents. You can use a small amount of mild dish soap if needed. Not dishwasher safe.
Hydrogen Preservation —
Keep cap on when not drinking. Keep bottle shaded and cool.
Protect from direct sunlight and freezing temperatures.
Never put the unit in a microwave oven or any other type of heating
device.
The cap, glass body and base can be disassembled for easy cleaning.
Base
Cup
Body
Cap