5
1 . Adjust the fan speed to your preference, keeping in mind that higher fan speeds will give better results .
2 . Using the A·PURE/A·PURE+ button, set the unit to A·PURE, for typical use, or A·PURE+, for increased smoke and odor control .
3 . For A·PURE+ MODE, using the Purifier Up and Purifier Down buttons, adjust the purification level to its lowest setting (500 sq . ft . ( 46
m²)) for the first 24 hours of operation, then gradually adjust up (if needed) to the square footage of the indoor area .
NOTE:
If you are operating your central heating and air conditioning fan or other ventilation system continuously, set the coverage
up to the total ventilated indoor area . Otherwise, set the coverage up to the size of the room . Do not exceed the size of the
ventilated indoor area when setting the purifier level .
Suggested locations listed in the order of preference:
1 . Nearest the source of the worst pollution .
2 . Near a cold-air return to thoroughly circulate the benefits of your Vollara Air &
Surface Pro+ throughout the area .
3 . In the area most heavily used to achieve maximum benefit .
NOTE:
The rear of the unit should always have at least one inch of open area to allow
unrestricted airflow .
OPERATION
PLACEMENT OF UNIT
4 . To operate the DEPART ROOM feature,
in unoccupied areas only,*
press the DEPART ROOM button until the desired time is reached
(2/4/8 hours) . The unit will display DEPART ROOM and the remaining
time . To interrupt the DEPART ROOM, press the A·PURE/A·PURE+
button .
NOTE: “Unoccupied areas” includes pets. Some pets, like humans, may experience adverse reactions from
exposure to increased levels of ozone and should not be present during DEPART ROOM MODE operation.
Fan Speed
Purifier Coverage
Purifier Setting Fan Setting
DEPART ROOM MODE:
The fan will show maximum, and DEPART ROOM will replace the purifier setting . The amount
of time (2/4/8 hours) remaining will depend on how long you have selected for the DEPART ROOM Mode to operate, by
pressing the Depart Room button .
CAUTION:
To prevent injury, be sure the power cord is not accessible to small children .
A·PURE MODE:
The unit’s display shows the fan speed (low to high)
and A·PURE to indicate that the ActivePure® Cell and ionization are both
functioning normally .
A·PURE+ MODE:
A·PURE+ lights up, adjustable purifier coverage
(500/1000/2000/3000) in square feet and fan speed (1/2/3/4/5) .
POWER OUTAGES:
Memory before power off settings .
Fan Speed
Time Remaining
Depart Room
Fan Setting