42.VW.2210.2554_BA_V02_EN
VAS 6923A
11
EN | Product description
Status display
Immediately after connecting the AC charging cable to a power source, the product runs
through a self-test. During this time, the status LED first flashes blue, then white. The
number of white flashes indicates the product software version. The AC charging cable then
indicates its operating state through a status LED. The operating states are shown as color
signals and are broken down as follows:
•
Standby (blue)
•
Charging (green)
•
Error (red)
The operating state is indicated by continuous illumination or flashing in one or more colors.
The flashing codes are shown on the product housing and in the table below.
Flashing code
Description
Meaning
Blue then white flashing The number of white flashes indicates the product software
version.
Blue, continuously
illuminated
Standby for three-phase power supply
Blue, white, blue, pause
Standby for two-phase power supply
Blue, white (long), pause Standby for single-phase power supply
Green, continuously
illuminated
Communication has been established between the AC
charging cable and the vehicle.
Green, pulsing
The traction battery is charging.
Alternately flashing red
and blue
Temperature error
Red, white, green, pause DC error
Red, white, blue, pause
AC error
Red, white, red, pause
Communication error
Red, continuously
illuminated
Device error
You can find a description of how to eliminate individual errors in the “Troubleshooting”
section.
