Specified torques
♦
⇒ “2.3 Assembly overview - auxiliary/supplementary heater
2.8
Removing and installing cover
⇒ “2.8.1 Removing and installing cover, auxiliary heater control
unit J364 ”, page 19
⇒ “2.8.2 Removing and installing cover, burner unit”, page 19
2.8.1
Removing and installing cover, auxiliary
heater control unit - J364-
Removing
– Remove auxiliary heater
– Unclip cover -1- in area -2-.
– Detach cover -1-.
– Detach cover -3-.
Installing
Install in reverse order of removal.
2.8.2
Removing and installing cover, burner
unit
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1410-
Transporter 2016 ➤
Auxiliary heater - Edition 04.2020
2. Auxiliary/supplementary heater
19
