Volkswagen 22102721, Operating Manual

Page: 7 / 20

32.VW.2210.3043_BA_V01_EN VAS 6606/27 7
EN | Safety
Intended use
The product consists of the following adapter cables:
• VAS 6606/27-1
• VAS 6606/27-2
The adapter cables allow you to connect both sides and all pins of the MEB traction battery's
low-voltage plug connection to the VAS 6606 isolator box. Laboratory safety sockets on the
isolator box connect the attached cables to outside applications.
The VAS 6606/27-1 adapter cable is used to connect the low-voltage plug directly to the MEB
traction battery.
The VAS 6606/27-2 adapter cable is used to connect the low-voltage plug to the port on the
vehicle for the MEB traction battery.
The product is not used to test that the circuit is de-energized.
Use only the plug connections on the vehicle that the manufacturer has specified in the
guided fault finding.
In this operating manual, vehicle manufacturers are exclusively defined as vehicle
manufacturers in the Volkswagen Group.
Any use beyond what is listed here is prohibited.
Requirements for the target group
Only qualified personnel may work with this product!
In this operating manual, qualified personnel is defined as personnel meeting all
requirements for working on high-voltage systems applicable in the country of operation, as
defined by:
•
Regulations applicable in the country of operation
•
Qualification according to DGUV 200-005 level 2 or higher, or equivalent
• Specifications from the vehicle manufacturer and/or the operator.
At all times while using the product, staff must wear the personal protective equipment
prescribed by the vehicle manufacturer for work on high-voltage systems.
Duties of the operator
The operator is responsible for ensuring that all staff working with the adapter cable fulfills
the requirements for the target group.
Furthermore, the operator is responsible for ensuring the following:
• The adapter cable is always in perfect working order.
•
The regular inspection intervals for the adapter cable are observed and recorded.