4
INSTRUCTIONS FOR USE
CHARGING THE HEADPHONES
• Please ensure that the battery is fully charged before using the device for the
first time.
• Connect the provided micro USB charging cable to the DC 5V charging slot
on the headphones, connect the other end of the USB to a wall charger or an
available USB port on a compatible device.
• The red LED indicator light will display in a solid light.
• When the headphones are fully charged, the LED indicator light will turn off.
• A voice reminder will notify you when the battery is low.
SWITCHING ON THE HEADPHONES
• To switch on the device, press and hold the Power Button for about 2
seconds until the blue and red LED lights turn on and start flashing. A voice
reminder will notify you when the device is on.
• To switch off the device, press and hold the Power Button for about 2
seconds until the blue and red LED light turns off again.
PAIRING WITH BLUETOOTH DEVICES
Your headphones must be paired to a Bluetooth device before it can be used. It
is only necessary to pair your headphones once with each device.
• Ensure that the headphones are off before pairing them for the first time.
• Press and hold the
Multifunction Button for about 3 seconds until the
blue and red LED lights turn on and start flashing.
• This means the headphones are now ready to pair with your
Bluetooth device.
• Ensure that your device’s Bluetooth is on. Search for the device “Sultans”.
Confirm pairing by selecting the device from the list.
• When successfully paired, the blue LED light will flash twice every 4 seconds.
• The device is now ready to make/receive calls and playback music.
• To play the next or previous track, press and hold the Volume Up/Next
