12
13
Dark Time :
Allows you to change the value of DarkTime
The slider allows you to adjust the value between -4000
microseconds (better luminosity) and 4000 microseconds
(better contrast). The value applied is inscribed above
the slider (0 in this example)
Moves Detection :
Enables or disables the Auto OFF feature when glasses
are not moving
Enabled: The glasses turn OFF automatically if no
movement is detected after 5 minutes (AUTO OFF
enabled).
Disabled: The glasses will stay on even if no motion is
detected. (AUTO OFF function disabled).
Advanced :
Delta Sync (μs) : Modify the sync offset (between -2000
and 2000 microseconds). Default = 0
7. TROUBLESHOOTING
PROBLEM
SOLUTION
My glasses are not
displaying 3D.
Check that your original
source is broadcasting 3D.
If yes, check if your 3D
system is correctly emitting
IR. Than make sure the
EDGE™ Universal glasses
are facing the IR emitter.
The same problem
continue. My glasses
are still not displaying
3D.
Please check if you have
the lastest software version
(part 5 of this user guide). If,
the problem persists please
ask the IR compatibility to
The glasses are blinking
strongly
Check that there is no
other IR source within a
range of 30 meters around
the 3D system set-up.
The glasses blink when I
turn them ON.
When this phenomenon
occurs, it means that
the battery is low. Please
recharge the glasses.
The EDGE™ Universal
glasses stay OFF.
Try recharging your glasses.
If the problem
persists, contact support@
volfoni.com
