Messenmagneetstrip / Magnetic knife holder :
VC503
Thank you for choosing VOLCAN!
Please read these instructions carefully before using.
Before you start
Thank you for choosing VOLCAN! Please read this entire manual carefully before use to avoid bodily injury and/or damage to the
product. We cannot be held responsible for the consequences of a wrong or faulty installation if the instructions in this manual
are not followed carefully. If you do not understand these directions, have any doubts about the safety of the installation, or have
any other questions about the product, please contact us at
.
Warning! Safety Instructions
Position the magnetic knife holder out of the reach of children
Always position the magnetic knife holder above the kitchen countertop to avoid personal injury from knives accidentally
falling down.
Never position the knife holder such that persons or animals are able to maneuver below the knife holder.
Keep this product away from electronic devices, bank/credit cards, metal and/or electronic body implants (such as
pacemakers) etc.
Before you place a knife on the knife holder, ensure the knife has sufficient magnetic properties to avoid the knife from falling
down.
Misuse of the magnetic knife holder can result in personal injury and/or damage to the product.
●
●
●
●
●
●
Mounting the product (visualize with illustrations)
Method 1 – Screws and plugs
Drill the holes
Place the plugs in
the drilled holes
Method 2 – 3M Tape
Clean the surface
Remove the protection
from the 3M tape
Use a level spirit
to level the knife
holder
Place the knifes
Intended use
This VOLCAN magnetic knife holder is placed
on a wall above the kitchen countertop. It is
used to hold knifes through the magnetic field
that the knife holder creates. This product is
only compatible with knifes that have sufficient
magnetic properties. This product is intended
for consumers and domestic use only.
Package content
1x Magnetic knife holder
1x User Manual EN/NL
2x Screws
2x Plugs
1x 3M tape
Specifications
Model number:
VC503
Material:
Stainless steel
Magnet type:
Ferrite
Finish:
Black powder coating
Weight:
875 g
Dimensions:
400 x 45 x 16mm
Hold the magnetic knife
holder in the desired
location and use a spirit
level to level it.
Mark the drill holes
Fix the backplate with
the screws and place
the knife holder
Place the knifes
Attach the knife holder
in the desired location
Let the knife holder dry
for 24 hours before use
Leave 24 Hour
