VOLAMP CamLinx II, User Manual, Page: 21 / 30

Document No. : UserManual_CII_1
age 21 of 30
Main Menu Options Sub Menu Options SELECT - > INFO
SWITCH 1 SWITCH 2
option (NOTE 1) option (NOTE 2) option (NOTE 3) (NOTE 4)
1 CAMLINXII 1 FPGA Head 55^C
BASE 2 FPGA 326e 56^C
3 PCB Issue No. 1
4 Unit ID 0475ae
5 Software 2660
6 Firmware N/A
7 Start Temp 40^C
2 AUDIO 1 Left 1 Line
2 Right 2
3 COMP CH2 SET 1 Enabled
2 Disabled
4 STD 1 STD SDI Output Unknown
2 STD CVBS Input 1
3 STD CVBS Input 2
4 STD SDI Input
5 STD CVBS Output
5 CAMERA NUMBER 1 1
2 2
3 3
4 4
5 5
6 TALLY OUTPUT 1 Local 1 LOCK ON
2 LED 2 LOCK OFF
3 Remote 3 STD
4 INV
7 SERIAL RX TX 1 CH1 1 RS232
2 CH2 2 RS422
3 CH3
8 FIBRE Local DRIVER (SFP) Temp
3G1 Fibre Loading
3G2 Status
Remote
NOTES
1 Push left or right to scroll up/down the Main Menu options listed below
2 Push left or right to scroll up/down the Sub Menu options.
3 Press and hold the centre button of Thumbwheel2 (right hand side) until the (- >) appears.
To confirm the setting, press and hold centre button of Thumbwheel2 until (- >) disappears.
4
Mic
Change the setting by pressing Thumbwheel 2 to the right or left.
These submenu settings display the system information listed below.