Page
9
of
9
STEP 6:
Hang the TVs/monitors on the stand starting with the center one first. Next, adjust the
angle of the left and right displays by moving the left and right arms on the pivot points. You can
adjust the horizontal position of the side displays by sliding them in and out on the side arms. When
satisfied, secure the display bracket onto the arm with the metal channel piece and the M8 Handle
Nut (Item #6 in TABLE 1) as shown in FIGURE 6 below.
The vertical position and the leveling of the displays can be adjusted by loosening the VESA mounting
screws and moving the TVs/monitors UP/DOWN in the slotted holes as shown below.
HINT: It is helpful to have a second person assist with the alignment process.
FIGURE 6
Finally, check for stability of the display stand with the TVs/monitors installed. Adjust the in/out
positioning of the base leg extensions as necessary. Enjoy your Volair Sim Triple Display Stand!
Summary of Contents for VS-MS
Page 6: ...Page 6 of 9 FIGURE 3...