Unvented Hot Water Cylinder
- 11-
3.7
Immersion Heater
Hot water temperature Settings –
1.
20°c
2.
35°c
3.
45°c
4.
60°c
5.
68°c
The cylinder is equipped with an additional electric immersion heater with an output of 3kW. The immersion
heater will be found under the top front cladding and is designed for use in unvented cylinders. It has a
temperature controller and a thermal cut out. To set the temperature required simply turn the arrowhead so
that it points at one of the numbers between 1 and 5. The list above shows the approximate temperature for
each setting.
When required the immersion heater boss can be used as an access to view internal of the cylinder
You can also control the temperature using a separate hot water control device with a suitable dual channel
230v timer.
Information
inspection access to the cylinder is available by removal of the immersion heater boss
.
