DEVICE FUNCTIONALITIES
Receiving a Call
At call arrival, the ringing indicator (1) on the left will start to flash and ring with the predefined
ringtone. Press the headset button
to respond.
Closing a call
From the base
:
Press the headset button
to end the call.
Making a call
From the General User Interface
: normally this method is more convenient. From the moment in which you
activate the call, la GUI theoretically lifts the handset: at this point press the headset button
.
From the base
: dial the number you wish to call and press
Dial
(software key seen on the LCD display), or press
the headset button
.
You can access the list of calls made via the function key
Redial
, selecting a call listed and pressing
Dial
to make
a new call.
Alternatively, you can forward a call, even in the middle of a call, via one of the 4 programmable function keys
(see figure 9), provided they have been properly programmed (please refer to the V-AT800 Configuration
Manual).
VOLUME CONTROL AND MUTE FUNCTION
Volume
To regulate the volume of a call you are listening to, press the menu key (2): the left hand key lowers the
volume, the right hand key increases it. Use the same keys when the headset is in its rest position to regulate
ringtone volume.
Microphone disactivation (Mute)
To disactivate the microphone whilst in conversation (Mute function), press the Mute function(3). The key will
start flashing red. Press the Mute key again to activate the microphone..
PUT ON HOLD AND RESUME THE CURRENT CALL
To put a call on hold, press the
Hold
(6) software key. Alternatively, you can programme one of the function keys
(9).
To retake the call on hold, press the
Resume
(6) software key. Alternatively, you can programme one of the
function keys (9), possibly the same one used for the Hold function.
FORWARD A CALL
Attended call forwarding
•
During the conversation press the software key (6)
Xfer
: the current call will be put on hold
•
Dial number you require and press
Dial
•
Wait for the called party to respond and press
Xfer
to transfer the call
Blind/ unttended transfer
