VOIspeed V-6017, User Manual

Page: 11 / 22

11
© VOI
SPEED
L
TD
.
VOI
SPEED
V-6017
03
Subnet Mask
The system will provide the subnet mask assigned to the adapter. This
parameter can be changed by entering a new one.
04
Gateway
Provides the IP address of the pre-defined gateway. It can be changed by
entering a new one.
05
DNS Server
Provides the DNS server’s IP address. This address can be changed by
entering a new one.
06
TFTP Server
Provides the TFTP server’s IP address. The address can be changed by
entering a new one. The TFTP server is used to update the adapter’s
internal firmware.
99
Reset
By entering 99 the system will give you the option to reset the adapter. If
you enter 9 the adapter will reset without losing any previous setting. In
case you entered the adapter’s MAC address, the default setting will be
applied after reset.
Note: the MAC address is a 12 digit number that can be found in the label
underneath the adapter. You will need to apply the following coding in
order to decipher the number:
•
A = 22
•
B = 222
•
C = 2222
•
D = 33
•
E = 333
•
F = 3333
When entering a new IP address using any of the commands above, you will need to
enter a 12 digit number without dots. As an example, the number 192.168.1.10 will need
to be entered as ‘192168001010’. Similarly, to change the subnet mask into
‘255.255.255.0’ you will need to enter the option ‘03’ followed by ‘255255255000’.
7 - Web Interface
In order to access the web interface you will need to enter the string
‘http://’ followed by
the adapter’s IP address. It is important to note that the PC from which you intend to
access the web interface and the V-6017 adapter need to be connected to the same