Inserting Batteries
I. Turn the battery chamber lid (18) counterclockwise using a coin
or something similar.
2.Two LR44 type alkaline batteries or two SR44 type silver batter-
ies are used with camera.
3. Place the batteries so that both po)sides are at the bot-
tom of the compartment.
4.Turn the battery chamber lid clockwise until it close firmly.
Battery Check
1. Move the film advance lever (4) to the ready position.
2. Lightly press the shutter release button(3). Now the exposure
metering system is switched on. When one of three LED lamps
( , or )lights, then battery condition is satisfactory. If no
lamp lights, the batteries need replacing or have been loaded
incorrectly.
3. Renew both batteries as necessary.
4. When not using of the camera, always return the film advance
lever to the original position to prevent accidentally releasing the
shutter.
Caution:Keep batteries away from infants and small children. In case a bat-
tery is accidentally swallowed, call a doctor immediately as the material
inside the batteries can cause serious problems.
Summary of Contents for BESSA-L
Page 1: ...INSTRUCTION MANUAL BESSA L...
