Venu 210i User Guide V1.0
Page 24
9 Appendix
The loudspeaker shall be a sub-bass system consisting of two high power 10” (381 mm) direct radiating
reflex loaded low frequency (LF) transducers in a rectangular enclosure.
The low frequency transducers shall be constructed on a cast aluminium frame, with a treated paper
cone, high excursion 101.6 mm (4”) voice coil, wound with copper wire on a high quality voice coil
former, for high power handling and long-term reliability.
Performance specifications for typical production unit shall be as follows: the usable bandwidth shall
be 40 Hz to 150 Hz (±3 dB) and with a maximum on axis SPL of 130 dB peak (124 dB continuous)
measured at 1 m using IEC268-5 pink noise. Power handling shall be 1200 W AES at a rated
impedance of 4
Ω
.
The system shall be powered by its own internal 1200 W dedicated power amplification module with
DSP management with two 600 W at 4
Ω
full range outputs.
The enclosure shall be constructed from a 15 mm multi-laminate birch plywood finished in textured
polyurethane and shall contain fixture points for a pressed weather-resistant steel powder coated grille
to protect the low frequency transducers with the external dimensions of (H) 334 mm x (W) 684 mm x
(D) 530 mm (13.2” x 26.9” x 20.9”). Weight shall be 32 kg (70.5 lbs).
The loudspeaker system shall be a Void Acoustics Venu 210i.
Architectural Specifications
Summary of Contents for Venu 210i
Page 1: ...Venu 210i User Guide V1 0 ...
Page 25: ......
