Stasys
Page 3
Reference Manual
Features
Close tolerance and durable components provide increased reliability and greater output.
Accurately machined 15 laminate birch plywood cabinets for superior strength.
Internal Powerdrive type 100 wall bracket mounting plate.
Built in Electronic protection device for the HF driver.
6 x Aero Track flying points for fast and accurate installation.
Wide and flat frequency response for unparalleled sound quality.
Tough kick proof grills with foam filters protect the components from the heaviest of abuse.
Rotatable Logo.
Three year warranty and guarantee.
System Connections
In passive mode the Stasys 4 use's pins +1 and -1 for it's input. In active mode pins +1 and -1 are
connected to the woofer and pins +2 and -2 are connected to the HF driver. The switch to change
operating modes can be found above the input speakons on the rear connector panel.
Stasys 4's speakon connectors are wired in parallel, so either speakon can be used as the input.
The other speakon can be used as a link output.
A positive signal to the + pin gives a forward cone movement on the Stasys 4 enclosure.
Notes
The Stasys 4 features a rotatable HF horn that allows the cabinet to be used in either vertical or
horizontal positions. To change the dispersion first loosen the screws that hold the grill in place.
Remove the grill and undo the screws holding the HF horn in place. Rotate the HF horn by 90 degrees
and replace the screws that hold it in place. Attach the grill and tighten the screws that hold it in place.
The HF horn is factory aligned for horizontal cabinet positioning. (80 h x 50 v when the cabinet is used
on its side, ie. as a stage monitor)
The Logo on Stasys 4 is spring loaded and rotatable. This allows the logo to be displayed
upright when the cabinet is used in either vertical or horizontal positions.
Precautions
Please consider the following precautions during use :
1. Install the Stasys 4 enclosure in a dry environment, do not expose the cabinet to rain or moisture.
2. When flying or mounting the Stasys 4 ensure safe working practices and follow the recommended
rigging guidelines.
3. The Stasys 4 enclosure contains very powerful magnets. Do not locate an enclosure near any
sensitive equipment such as: VDU monitors, CRT TV's or high gain preamplifiers.
Summary of Contents for STASYS 4
Page 1: ...STASYS 4 OWNER S MANUAL ...