Digidrive V2
User Manual
4
4.
For the crossovers for each linked output channel, scroll
through channel pages until LowPass is displayed.
Using the control wheel, and control wheel button, set
the desired frequency and filter type and check the LPF
is enabled.
5.
For the HPF, scroll across one page to HighPass and
repeat the process.
6.
Now the crossovers are set, scroll through the
remaining pages to set the values for the rest of the
settings (EQ, Limiter, Delay) for each output channel.
There are multiple parameters to some settings, use the
control wheel button to change between them.
7.
To store the program, press the Menu button until Save
is displayed. Use the control wheel button to select, and
choose the name of the preset. Use Exit to backspace,
and press Menu again for saving no/yes.
8.
When the preset/program has been finalised and saved,
power up the power amplifiers. Now the system is ready
to go.
NOTE: alternatively, setting up a preset can be made beforehand on
the Live Link software and synced with the Digidrive V2 unit. This
allows the user to simply connect the unit to a laptop with Live Link,
plug in the appropriate connections, turn each bit of equipment on
in the correct order and the system is ready to go.
