Page 10
UG10567-1.0 - Cyclone 4 User Guide V1.0
4 Cable and Wiring
4.4 Cyclone glanded connector wiring
1. Remove both M4 bolts from the rear of
the connector plate
2. Undo the glanded connectors from the
rear of the connector plate.
3. Remove the terminal block from the rear
of the cabinet
4. Insert the cables into the glands as shown
and connect to the terminal block as
shown in figure 4.1
5. Reconnect the terminal block, once it
is fixed in place reconnect the glanded
connector plate with the M4 bolts provided
