Page 16
UG10519-2.0 - Air Motion User Guide V2.0
5.3 Air Motion Ground Stacking
Step 5:
Secure with a minimum of one 1 tonne SWL
ratchet straps. Ensure the stand is secured
from sliding or rotating and on a level surface.
Figure 5.12: Air Motion mounted on bass-cabinet
Step 3:
Tighten the M12 Areotight nut using a 19 mm
ratchet spanner while another person sup-
ports the Air Motion.
Step 4:
Confirm the Air Motion is securely fastened
to the stand, and lift the assembly onto the
bass-cabinet with suitable equipment.
The assembly is heavy; be aware
of the high centre of gravity! You
will need to tilt the mounting
board forward to place one hand
under the board and get a secure grip on
the hand hold. Then place your other hand
on the horn-flare. Raise the assembly to the
bass cabinet and slide until the feet drop into
the feet pockets. If the bass cabinet is on an
uneven surface, ensure that it is stabilised
with wedges before mounting the Air Motion.
Figure 5.10: M12 Aerotight nut tightening
Figure 5.11: Air Motion on mounting board and bracket