Page 10 of 15
Manual Score-8 - 2021-10 EN
Mounting the tilting and swivelling wall bracket
1. When mounting the bracket to the wall, follow the manufactu-
rer‘s operating instructions.
2. Remove the swivel bracket on the wall bracket.
3.
Use two M6 x 15 mm threaded screws and washers to fix the
swivel bracket to the two M6 threaded points (A) on the rear of
the loudspeaker.
4. Hang the swivel bracket (with mounted speaker) into the bra-
cket attached to the wall.
5. Screw parts together using the lower carriage bolt, washer and
lock nut.
6.
Adjust and fix the tilt.
Mounting the U-bracket
1. Remove the M10 countersunk screws (A) on both sides of the
Score-8.
2. Use the supplied M10 hexagon head screws (B) including pla-
stic washers to mount the U-bracket.
3. To protect the coatings, place the plastic discs between the
hexagon head screw, U-bracket and Score-8.
Mounting the C-bracket
The bracket consists of two different brackets and connected by
two M8 screws.
1. Mount the C-bracket (B) with two M6, one M8 x 15 mm threa-
ded screw and washers firmly to the three threaded points (A)
on the rear of the speaker.
2. Observe the recess (C) for the cable feed on the bracket.
3. Mount the second bracket (D) horizontally or vertically to the
wall using the appropriate fixing material.
4. Connect the brackets with the two M8 screws (E).
5.
Adjust and fix the tilt or direction.
Note: Since the cabinet wall lies benneath the rear threaded
points, the threaded screws must not exceed 15 mm in length!
Working with Score-8
A
A
G
A
B
F
D
E
Front