Page 8 of 13
Manual CXN-16 - 2018-07 EN
Overview of presets
Display name
CH1 2.400 W
CH2 800 W
CH3 800 W
Description of the preset
CXN Wedge
4 x 8“
IN1
1,4"
IN1
-
IN2 Normal mode as floor monitor for
Musician.
CXN WedgeEasyMic
4 x 8“
IN1
1,4"
IN1
-
IN2 With a modified frequency response to
match the treble boost of most vocal
microphones without having to make
filter settings. Higher gain before fee-
dback. A little less brilliant compared
to music.
CXN Drumfill/EDM
4 x 8“
IN1
1,4"
IN1
-
IN2 CXN-16 lying on Paveosub-118 as
monitoring for drummers and DJ`s.
CXN top/midhigh
4 x 8“
IN1
1,4"
IN1
-
IN2 For use of the CXN-16 as a linear top
with bass support.
CXN CH2,3 Pav218
2 x 18“
IN1
4 x 8"
IN2
1,4"
IN2 Floor monitor in Half Power Mode.
Paveosub-218 for front sound.
CXN CH2,3 Pav118
1 x 18“
IN1
4 x 8"
IN2
1,4"
IN2 Floor monitor in Half Power Mode.
Paveosub-118 for front sound.
Normal Mode
In normal mode, the floor monitor is bi-amping on two channels (2.400 W + 800 W/4 Ω) of the HDSP-6 or
HDSP-4 amplifier. To do this, connect it to the
lower
SpeakON
®
connector.
Half Power Mode
In half power Mode, the floor monitor is bi-amping on two channels (800 W + 800 W/4 Ω) of the HDSP-6 ampli-
fier and used on the upper SpeakON
®
connector.
The 2.400 W channel of the lower SpeakON
®
connector is available for subwoofers.
Pin configuration upper SpeakON
®
connector:
1+/1- OUT CH3, 800 W
2+/2- OUT CH2, 800 W
Pin configuration lower SpeakON
®
connector:
1+/1- OUT CH2, 800 W
2+/2- OUT CH1, 2.400 W
Note: A Voice-Acoustic self-powered subwoofer can power a floor monitor bi-amping in half power mode.
The single basses require a Y-adapter cable to connect the 800 W channels (1+/1-) connectors into a 4-pole
Speakon cable (LF 2+/2-, HF 1+/1-).
The Pavesub-218sp can be connected to a floor monitor in half power mode directly with a 4-pin Speakon
cable. The 2.400 W channel is not output on the 218sp and the right SpeakON
®
connection is occupied by
both 800 W channels.
Working with CXN-16
OUT3: 800 W
OUT2: 800 W
OUT1: 2.400 W
