1
EN
Safety Instructions
•
Never overload the shelf, causing it to bend.
•
Care must be taken when cleaning/handling the shelf to avoid possible injury from exposed edges.
Pack Contents
•
Wire shelf x 1
•
Wall brackets x 2
Assembly
1.
Using the brackets as templates, mark the holes in the wall where the shelf is to be mounted.
2.
Hold the shelf to the wall and mount the brackets over the shelf arms using suitable fixings
(not supplied).
Cleaning
•
Clean the shelf using warm soapy water.
•
Dry thoroughly after cleaning.
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of VOGUE.
Every effort is made to ensure all details are correct at the time of going to press, however, VOGUE reserve the right to
change specifications without notice.
Note: Be sure to check all packaging materials for any small parts that may have come
loose during transportation
WARNING: Ensure the substrate and fixings used to mount the shelf are suitable to
support the weight of the loaded shelf.
If neccessary, seek professional help to ensure the shelf is safely mounted.
Width of shelf