3
INSTALLATION INSTRUCTIONS
It is recommended not to place object on the top of appliance which is magnetic,
heavy, or be filled with water. Electronic components may not work steadily if
5.
The refrigerant of this product is R600a,which is inflammable. So, be cautious not
to damage the cooling system during the transportation and installation.
DISPOSAL:Do not dispose this product as un-
sorted
municipal waste.Collection of such waste
separately
for special treatment is necessary.
6.
7.
water gets inside. Do not store object which is costly or impressible to temperature
and , e.g. serum, bacterin and so on.
NOTICE:
When gas leaks from its container, do not pull the plug, out or in, for it may
arouse sparks and fire calamities.
1.
Do not place bottled beverage in the freezer, so as to prevent breaking.
Do not splash water on the rear of the appliance, for it may cause malfunction
or electric shock.
2.
3.
Do not store inflammabe materials such as ether, benzene, LP gas and glue
etc in the refrighterator.
4.
The refrigerator should be located in a completely flat surface, leave
1.97-3.94'' (5-10 cm) between each side of the appliance and the wall,
and leave 11.81'' (30 cm) between the top of the appliance
and the ceiling.
1.
Choose a location which is not exposed to sunlight ,
high temperature or humid , as humidity may cause stain.
2.
Pull out the bottom panel before installation.
3.
The appliance can be adjusted by switching its two legs in
the front of the bottom panel when it is unstable. Switching them
in the clockwise direction can rise up the maching.
4.
The location should be firm and flat. An un-securely
position may cause noise and libration:
(a)The noise may be increased if the floor is not firm.
(b) Put a sheet under the appliance to solve the heat
emission if you need to locate it onto a carpet.
5.
Make sure the adjustable legs are clung to the floor,
and set the appliance slope backward slightly to keep the doors closed tightly.
6.
