11
2
Display the time value
9
Reservation function
3
Reminder time setting icon
10
Oven working icon
4
Reminder time icon
11
Display the temperature value
5
System time icon
12
Unit of degree Celsius
℃
6
System time setting icon
13
Lock function
7
Work parameter setting icon (time
and temperature)
1.3.3 Function icon instruction
Icon
Function
Icon
Function
Top outer heat element
Top inner heat element
Heating fan (Defrost)
Bottom heat element
Program and function instruction
1. Power on
Connect your appliance to the mains supply, all indicator lights of the display board will light
up for 1second and then enter the clock setting state. Default time show 12:00, hour “12”
flashes, the system clock setting icon “ ” flashes, and the system clock icon “ ” is always
on. The clock can be input at this time, refer to clock setting requirement for details.
•
After 10 seconds without any operation and the oven will enter to adjust minute
automatically.
•
Within 10 seconds without any operation when adjusting minute, the oven will enter
standby mode automatically.
•
Under the standby mode, the display always shows system time.(Refer to picture 3 for
the display effect.)
Pic 3: Initial standby mode
When the oven is powered on, the oven door lock will start to self-inspection. During the
self-inspection, the door lock will run back and forth automatically.
If there is no abnormal
alarm within 20 seconds, then self-inspection is completed. Or if it shows fault code “E-3”