VGZ-010 / 20120105.0
VG820E HEARTWOOD™
/
Page 7
LOCATING STOVE continued…
FLOOR PROTECTOR
FLOOR PROTECTOR
BACKW
ALL
SIDEW
ALL
20"/
50.8cm
29"/
73.7cm
18"/
45.7cm
18"/
45.7cm
16"/
40.6cm
34"/86.4cm
Fig. 4a – Front View
Minimum Clearance Dimensions
from Combustible Surfaces
Fig. 4b – Side View
Minimum Clearance Dimensions
from Combustible Surfaces
CAUTION: KEEP FURNISHINGS AND OTHER
COMBUSTIBLE MATERIALS AWAY FROM THE
STOVE.
NOTE: BEFORE FIRING STOVE SLIDE FIRE-
BRICKS TOWARDS THE REAR SO NO GAPS
REMAIN BETWEEN BRICKS.
Fig. 5 – Top View
Minimum Corner Clearances
from Combustible Surfaces
24"/61cm
24"/61cm
18"/
45.7cm
DRAFT DAMPER
6"/15cm
Fig. 6 – Draft Damper Installation
DRAFT DAMPER
(must be installed
before use — NO
EXCEPTIONS)
Continued on next page
A Draft Damper included with the stove must be
installed in the first straight section of pipe exiting the
stove before the stove pipe is connected and the wood
stove is used.
1. Drill two 1/4˝/6mm holes centered on either side of
the pipe section 6˝/15cm from the top end of the
pipe (figure. 6).
