- 2 -
Set-up:
Follow instructions with initial set-up. In case of troubles during use
initiate a new set-up as illustrated here.
1.
a. First install infrared receiver and then insert power plug.
b. Move the TriMotor to the wall. (by hand or by pressing
the ‘LED’ button and ‘down’ button simultaneously)
c. Press set-up button for 5 sec. (wait till light flickering
changes)
2. Set Swivel limit (see picture 2)
Set swivel limit on the TriMotor
Moving the TriMotor:
Summary of Contents for TriMotor VFWE 552 RC
Page 4: ... 4 ...
