Voda Plumbingware Eclipse Square 3 VECL041 Manual Download Page 2

4

2

1

3

4

5

6

WARRANTY

Please refer to our website for warranty information: 

www.vodaplumbingware.co.nz/warranty

In the unlikely event that this product fails during its warranty period, phone our Customer Service team 
immediately on 0508 367 366 – as unauthorised removal of the product may void the warranty.

CARE AND MAINTENANCE

When cleaning your Voda product (including chrome, stainless steel, coloured or any other surface coating) you 
must not use any type of astringent, abrasive or citric cleaners.  

We recommend using only a soft, damp cloth and on occasion a mild soap solution.  Try to avoid excessive 
scrubbing as this could cause damage and void your warranty.

ATTACH PROOF OF PURCHASE HERE

Voda Plumbingware Limited     |     Freephone: 0508 367 366     |     5 Hewlett Street, Port Whangarei 0110     |     vodaplumbingware.co.nz

1.  Decide where you would like your Shower rail positioned in relation to your elbow (water supply) then measure and mark  

      hole positions (at points A and B) with a pencil at exactly 700mm apart. 

2.  Drill two holes where you have marked.

3.  Fit the wall fixing parts into the drilled holes.

4.  Push the rail bracket onto the wall fixings, then tighten the grub screws.

5.  Fix the elbow to the water inlet.

6.  Attach hose to elbow and handpiece then insert the shower handpiece into holder on the rail.

850mm

700mm

Reviews: