VocoPro UHF-28, Owner'S Manual

Page: 13 / 16

13
Basic Operations
Using the UHF-28
The UHF-28 can be used as a plug-in module or as a stand-alone module. In both setups, the function of the UHF-28 is the
same.
To use the UHF-28:
1. Plug in all power sources.
2. Switch on the your main unit and the UHF-28.
3. Switch on the wireless microphone.
4. Adjust the volume using the UHF-28s volume control, and using the mic input volume control on your main unit.
When using the UHF-28 as a plug-in module, (SOUNDMAN, DVD-SOUNDMAN, HERO-RV, CHAMPION-RV) the UHF-28 will
use two of the input channels. Be sure to determine which inputs are being used, as plugging a wired mic or instrument
into that input channel might switch off the wireless microphone.
To determine which input channel the UHF-28 is using (SOUNDMAN, DVD-SOUNDMAN, HERO-RV, CHAMPION-RV):
1. Turn all the individual input channel volume controls down.
2. Speak into the wireless microphone while turning up each input channel independently.
3. Make a note of which input channel the UHF-28 is using so that no cables are plugged into that input channel while the
UHF-28 is in use.