background image

2

CAUTION

The apparatus is not disconnected from the AC power source so long as it is connected to the 

wall outlet, even if the apparatus itself is turned off. To fully insure that the apparatus is indeed 

fully void if residual power, leave unit disconnected from the AC outlet for at least fifteen 

seconds.

1.   To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future 

      reference. 

2.   Install your unit in a cool, dry, clean place – away from windows, heat sources, and too much vibration, 

      dust, moisture or cold. Avoid sources of hum (transformers, motors). To prevent fire or electrical shock, do 

      not expose to rain and water.

3.   Do not operate the unit upside-down.

4.   Never open the cabinet. If a foreign object drops into the set, contact your dealer.

5.   Place the unit in a location with adequate air circulation. Do not interfere with its proper ventilation; this will 

      cause the internal temperature to rise and may result in a failure.

6.   Do not use force on switches, knobs or cords. When moving the unit, first turn the unit off. Then gently 

      disconnect the power plug and the cords connecting to other equipment. Never pull the cord itself.

7.   Do not attempt to clean the unit with chemical solvents: this might damage the finish. Use a clean, 

      dry cloth.

8.   Be sure to read the “Troubleshooting” section on common operating errors before concluding that your unit 

      is faulty.

9.   This unit consumes a fair amount of power even when the power switch is turned off. We recommend that 

      you unplug the power cord from the wall outlet if the unit is not going to be used for a long time. This will 

      save electricity and help prevent  fire hazards. To disconnect the cord, pull it out by grasping the plug. 

      Never pull the cord itself.

10. To prevent lightning damage, pull out the power cord and remove the antenna cable during an electrical 

      storm. 

11. The general digital signals may interfere with other equipment such as tuners or receivers. Move the 

      system farther away from such equipment if interference is observed.

12. When positioning your equipment, especially regarding speakers or other accessories, avoid positioning 

      them over areas where they can fall and cause injury to yourself and others.

CAUTION: 

Read this before operating your unit

Note:

Please check the copyright laws in your country before recording from records, compact discs, radio, etc. 

Recording of copyrighted material may infringe copyright laws.

Summary of Contents for DA-9800RV




















Reviews: