20
Rear Panel Controls and Functions
10. REC AUDIO OUTPUT JACKS:
These outputs can be used to connect an additional tape deck or other
recording device. Connect the left and right REC outputs to the respective left and right ("R") record (REC) input
jacks on the back of your external tape deck. Only the music being played on the CDG-600RF will record onto
your external tape deck. (Follow instructions for using either player on the CDG-600RF) Play the desired CD/CDG
or cassette on the CDG-600RF and record it on your external tape deck. Vocals from the CDG-600RF will not be
recorded using these jacks. To record music and vocals from the CDG-600RF to an external tape deck connect
your external tape deck to the "L" AND "R" "PRE" output jacks of the "AUDIO OUTPUT" section.
(See #16 on REAR PANEL diagram. Also see "CONNECTING OTHER COMPONENTS TO THE CDG-600RF ",
"Expanding Your System")
11. AC POWER CORD:
Plugs into any AC wall outlet.
12. AUDIO PRE-OUT JACKS:
These two output jacks can be used to connect an external tape deck on which to
record music AND vocals, being played on the CDG-600RF. Connect the left and right "PRE" output jacks of the
CDG-600RF to the respective left and right input jacks (usually "REC IN" on most tape decks) on the back of your
external tape deck. (Follow instructions for using either player on the CDG-600RF) Play the desired CD/CDG or
cassette on the CDG-600RF and record it on your external tape deck.
13. VIDEO OUTPUT JACK:
The video output jack is used to connect the CDG-600RF to a television monitor.
When properly connected, the television monitor will display lyrics and graphics from CDG discs being played on
the CDG-600RF. There are three ways to connect a television monitor to the CDG-600RF. 1) Connect the "VIDEO
OUTPUT" jack to the "VIDEO IN" on the back of the television monitor. There is an RCA connector cord provided
with the CDG-600RF for this type of connection. BE SURE TO SWITCH YOUR TELEVISION MONITOR TO
"VIDEO" MODE, OTHERWISE LYRICS AND GRAPHICS WILL NOT APPEAR. 2) If your television monitor does
not have and RCA type connector and only has a coaxial connector, you can use a VCR to connect the CDG-
600RF to your television monitor. To do this, connect the "VIDEO OUTPUT" jack on the back of the CDG-600RF
to the "VIDEO IN" on the VCR. (See diagram on opposite page). BE SURE THE TELEVISION MONITOR IS SET
TO " VIDEO" MODE AND THE VCR SETTING CORRESPONDS TO THE JACKS YOU HAVE CONNECTED THE
PLAYER TO, OTHERWISE LYRICS AND GRAPHICS WILL NOT APPEAR. If you are unsure of which setting on
the VCR should be used, see manufacturer’s instructions provided with the VCR. 3) If you do not have a VCR, or
RCA connectors on the back of your television monitor. You will need an "RF" modulator. To use an "RF"
modulator, connect the "VIDEO OUTPUT" jack on the back of the CDG-600RF to the "VIDEO IN" jack on the "RF"
modulator. Next, Connect the "OUTPUT" of the "RF" modulator, with a coaxial cable (not provided) , to the
"ANTENNA INPUT" of the television monitor. BE SURE TO SET THE TELEVISION MONITOR TO "CHANNEL 3",
OTHERWISE LYRICS AND GRAPHICS WILL NOT APPEAR. (Refer to diagram on opposite page)
14. VIDEO INPUT JACKS:
There are two video input jacks on the back of the CDG-600RF. They both serve the
same purpose and can be used to connect two external players at a time. They are labeled separately, "DVD"
(digital versatile disc) and "LD" (laser disc), to allow you to easily identify which jack you have connected to which
player. When a DVD or LD player has been properly connected, (See "CONNECTING OTHER COMPONENTS
TO THE CDG-600RF"), the television monitor connected to the CDG-600RF will display lyrics and graphics from
the discs being played on the external player(s). To connect an external player use an RCA connector
cable. Connect either the DVD or LD VIDEO INPUT jack on the back of the CDG-600RF to the "VIDEO OUTPUT"
jack on the external respective player. The basic rule is "INPUT" connected to OUTPUT". WHEN PLAYING AND
EXTERNAL DVD OR LD PLAYER, BE SURE TO SELECT THE DVD OR LD SETTING ON THE FRONT OF THE
CDG-600RF, OTHERWISE THERE WILL BE NO AUDIO OR VIDEO. (See FRONT PANEL diagram, #26, #27)
