30
VOCERA EDGE ZEBRA PRINTER SETUP AND CONFIGURATION USER GUIDE
Appendix C: Prevent Print Mode Override
Use the instructions below to help prevent your printer from automatically changing from Peel-Off Mode to Tear-Off Mode or vise versa.
1. From the Zebra Setup Utilities, click
Open Communication with Printer
.
2. Enter the commands described below.
To prevent accidental change of print mode from the template, ZPL command ^MM can be ignored by sending the command:
! U1 setvar "device.command_override.add" "^MM"
Note that this will also prevent the Setup Utility from making changes, so can be cleared with
! U1 setvar "device.command_override.clear" ""
Or toggled off with
! U1 setvar "device.command_override.active" "no"
Print Mode scripts
Below are command sequences to set peel-off mode or tear-off mode, and prevent accidental changes. They can be sent via
communications interface or saved and sent as file.
