3
Reception Method of Atomic Radio Controlled Watches
Your watch should be positioned in the following shape and put near a window (or on a
non-metal window sill) during signal reception or you will not be able to get the best
reception result.
1.
Correct positions for signal reception
For the metal case with metal band watch, the watch-band should be away from the
watch case as shown below (example: inserting a match box between the case back and
the metal band to separate the metal case from the metal band) or it will affect the
reception.
Country Signal Selection:
You can set your watch so that the Atomic signal will be received, when you are
located within the continental USA, UK, Germany or Japan (60 KHz).
After changing a Country setting, the watch will run with the new time accordingly.
Please wait while the second hand spins quickly around the dial until it has
completed and returns to normal second movement.
Select USA, UK, Germany, or Japan (60 KHz only) signal:
For USA signal, you need to set to your right Time Zone when setting the USA signal.
1.
Holding S4
while the watch is in the real-time (regular) mode
for more than 5
seconds
until the watch announces
“Set Alarm”
– but follow instructions below
2.
Push S4 another 3 times
,
until on the third press the watch announces
“Global
signal selection,
only when you visit this country”
, it also states
“Press S3 to Set”
3.
After
pressing S3
to set watch
4.
It will then state “
Press S1 to set
”
Repeatedly press S1
until you reach the desired selection (as listed below):
UK
Germany
Japan (60 KHz only)
USA, Pacific
USA, Mountain,
USA, Central,
USA, Eastern
