9
Rear Panel
1
2
3
4
5
6
7
8 9 10
1. Input Gain
This adjusts the input level of the Lead Vocal signal for both the
Mic In and Line In. The relative signal strength can be determined
by the Vocal Signal Strength indicator on the front panel.
2. Mic In and Line In
The Vocalist Live 3 uses a combo jack for vocal input. This jack
will accept either a balanced mic-level signal on the XLR portion
of the jack or a line-level signal on the ¼
″
portion of the jack. The
¼” jack accepts both balanced TRS and unbalanced TS inputs.
3. 48V Phantom Power Switch
Pressing this switch turns on the 48V phantom power to the Mic
In. With the switch in the out position, the 48V phantom power is
turned off.
Note:
Phantom power is normally only needed with condenser
microphones and should never be used with ribbon microphones.
To avoid damaging the microphone, please consult your micro-
phone documentation to ensure phantom power is applied only
when appropriate.
