T E C H N I C A L W H I T E P A P E R / 4 1
VMware vSphere 5.0 Evaluation Guide –
Volume One
If you would like to see the effects of the various isolation response settings in this situation, simply change the
isolation response to the desired setting and perform this test again.
Figure 40.
Restoring Uplinks for the Host with the esxcfg-vswitch –l Command
To restore normal operation, utilize the ESXi Shell to execute the esxcfg-vswitch -l command for each of the
uplinks that were previously removed. Use the esxcfg-vswitch –l command to verify that the uplinks have
been restored.
Log out of the ESXi Shell by typing
exit
at the prompt. Use Alt-F1 to return to the console screen.
