VMI Viber X Manual Download Page 19

19

Vibration Measurement Instruments

Warranty disclaimer

VMI warrants the products to be free from defects in material and workmanship 

under normal use and service within two years from the date of purchase and which 

from our examination shall disclose to our reasonable satisfaction to be defective. 

Warranty claimed products shall be returned prepaid to VMI for service. We reserve 

the right to repair or to replace defective products. Always try to explain the nature 

of any service problem; by e-mail or telephone. Check fi rst all natural problems, 

like empty batteries, broken cables, etc. If returning the product, be sure to indicate 

that the purpose is to make repairs and indicate the original invoice number and 

date of shipment.

Warranty exclusions

Damage not resulting from a defect in material or workmanship or by other than 

normal use. Damage resulting from repairs performed other than by an authorized 

service centre. The limited two year warranty and remedies contained herein are in 

lieu of all other warranties, expressed or implied including any warranty of mer-

chantability and any warranty of fi tness for a particular purpose, and all other rem-

edies, obligations or liabilities on our part. In addition, we hereby disclaim liability 

for consequential damages for breach of any expressed or implied warranty,

including any implied warranty of merchantability and any implied warranty of 

fi tness for a particular purpose. The duration of any implied warranty which might 

exist by operation of law shall be limited to one year from the date of original retail 

purchase.

NOTE:

 Some countries do not allow the exclusion or limitation of consequential 

damages, and some countries do not allow limitation on how long an implied 

warranty lasts, so the above exclusions or limitations may not apply to you. This 

warranty gives you specifi c legal rights and you may also have other rights that 

vary from country to country. If you have problems with your instrument during or 

after the warranty period, fi rst contact your distributor you purchased the unit from.

  

Manual Viber X1_121002.indd   19

10/3/12   9:26 AM

Warranty disclaimer

VMI warrants the products to be free from defects in material and workmanship

under normal use and service within 2 years from the date of purchase and which

from our examination shall disclose to our reasonable satisfaction to be defective.

Warranty claimed products shall be returned prepaid to VMI for service. We reserve

the right to repair or to replace defective products. Always try to explain the nature

of any service problem by filling in the form found on the website www.vmiab.com 

and attach it in an email to VMI. Check first all natural problems, like empty batte

-

ries, broken cables, etc. If returning the product, be sure to indicate that the purpose 

is to make repairs and indicate the original invoice number and date of shipment.

Warranty exclusions

Damage not resulting from a defect in material or workmanship or by other than

normal use. Damage resulting from repairs performed other than by an authorized

service center. The limited two year warranty and remedies contained herein are in

lieu of all other warranties, expressed or implied including any warranty of mer-

chantability and any warranty of fitness for a particular purpose, and all other reme

-

dies, obligations or liabilities on our part. In addition, we hereby disclaim liability

for consequential damages for breach of any expressed or implied warranty, inclu-

ding any implied warranty of merchantability and any implied warranty of fitness 

for a particular purpose. The duration of any implied warranty which might exist by 

operation of law shall be limited to one year from the date of original retail

purchase.

NOTE

: Some countries do not allow the exclusion or limitation of consequential

damages, and some countries do not allow limitation on how long an implied

warranty lasts, so the above exclusions or limitations may not apply to you. This

warranty gives you specific legal rights and you may also have other rights that

vary from country to country. If you have problems with your instrument during or

after the warranty period, first contact your distributor you purchased the unit from.

Summary of Contents for Viber X





















Reviews: