VMI Artesia AP-100, Owner'S Manual

Page: 22 / 43

14. Touch
Press [FUNCTION] button to enter the function menu and use
[+/YES] [-/NO] buttons or [DATA WHEEL] knob to select [TOUCH?].
Press [ENTER] button into the option, the LCD will display:
TOUCH: NORMAL.
FUNCTION
Then use [+/YES] / [-/NO] button
the parameter as shown below:
NORMAL
HARD
FIX?
SOFT
or [DATA WHEEL] knob to set
If you choose TOUCH
：
FIX?, Press [ENTER] button to enter the
option, then use [+/YES] / [-/NO] button or [DATA WHEEL] knob
to set the parameter: 00~127 (Default: 100).
15. Transpose
Press [FUNCTION] button to enter the function menu and use
[+/YES] [-/NO] buttons or [DATA WHEEL] knob to select
[TRANSPOSE?]. Press [ENTER] button into the option, the LCD
will display: TRANSPOSE: -0-.
FUNCTION
Then use [+/YES] / [-/NO] button or [DATA WHEEL] knob to
adjust the TRANSPOSE Range: -12 ~ +12 (Default: 0).
Press [+/YES] & [-/NO] buttons simultaneously to restore the
default value.
16. Master Tune
Press [FUNCTION] button to enter the function menu and use
[+/YES] [-/NO] buttons or [DATA WHEEL] knob to select
[MASTERTUNE?]. Press [ENTER] button into the option, the
LCD will display: MASTERTUNE: -0-.
18