2
2
CLEVIS
SURFACE CONTROL
CLEVIS
SURFACE CONTROL
EZ CONNECTOR
CLEVIS
Replacement 11E rear motor mount location
Replacement 11I mount the brushless motor
to the rear motor location
Replacement 11G the rear motor install to
the rear location
3x10mm sheet metal screw
REPLACEMENT STAGE 13
REPLACEMENT STAGE 13
13A- Elevator and rudder servos location
13B- Elevator servos connected to the elevator control rod, rudder
servo connected to the rudder and gear steering control rod.
Elevator control rod
Rudder control rod
Nose steering control rod
For Rudder and Elevator
use control horn sets
with 3x25mm
4
For Aileron and Flaps
use control horn sets
with 3x28mm
Elevator servo location
Rudder servo location
