VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
9
☐
Remove the oil drain plug and drain the oil into a clean container with a capacity
of at least 4 L (1 USG). The oil will be reused later in the install (Figure 1).
☐
Remove the oil return hose from the fitting on the WHASP Tank (Figure 2).
Figure 1 — Drain oil
Figure 2 — Disconnect oil return hose
Oil drain plug
#6 JIC - #8
ORB fitting
☐
Remove the #6 JIC - #8 ORB fitting from the WHASP Tank (Figure 2).
Installation
