background image

VMAC - Vehicle Mounted Air Compressors

VMAC Technical Support: 888-241-2289

VMAC Knowledge Base: kb.vmacair.com

2

Notice

Copyright © 2022 VMAC Global Technology Inc. All Rights Reserved. These 

materials are provided by VMAC for informational purposes only, without 

representation or warranty of any kind, and VMAC shall not be liable for errors 

or omissions with respect to the materials. The only warranties for VMAC 

products and services are those set forth in the express warranty statements 

accompanying such products and services, if any, and nothing herein shall be 

construed as constituting an additional warranty. Printing or copying of any page 

in this document in whole or in part is only permitted for personal use. All other 

use, copying or reproduction in both print and electronic form of any part of this 

document without the written consent of VMAC is prohibited. The information 

contained herein may be changed without prior notice. 

Printed in Canada

Additional Application Information

For use with VMAC G300003, Gas Driven Air Compressor (G30).

Registered Trademarks

All trademarks mentioned in this manual are the property of their respective 

owners. VMAC’s use of manufacturers’ trademarks in this manual is for 

identification of the products only and does not imply any affiliation to, or 

endorsement of said companies.

Loctite®

Loctite® 242

 and 

Loctite® 567

 are registered trademarks of Henkel AG & 

Company KGaA.

Important Information

The information in this manual is intended for certified VMAC installers who 

have been trained in installation and service procedures and/or for anyone with 

mechanical trade certification who has the tools and equipment to properly and 

safely perform the installation or service. Do not attempt installation or service 

without the appropriate mechanical training, knowledge and experience.

Follow all safety precautions. Any fabrication for correct fit in modified vehicles 

must follow industry standard “best practices”. 

Document: 1901193

Changes and Revisions 

Revision

Revision Details

Revised by

Checked by

Implemented

Eng.

Tech. Qual.

Mech.

Elec.

A

Initial release.

MSP

SPT

N/A

MSP

LPH

25 Feb. 2022

Summary of Contents for A500245

























Reviews: