15
CONTROLS
Description
Gain: This feature controls the audio input
signal strength going into the amplifi er.
Bass Boost: Increases the bass level from
+1dB up to +18dB.
LPF Frequency: Low pass crossover
frequency fi lter adjustment.
REMOTE: Gain knob cable input plug to
conveniently adjust the bass boost strength.
Power LED: Power and protection amplifi er
status indicator.
Input: Line level audio inputs.
Output: Line level audio outputs.
8
POWER CONNECTIONS
1. Carefully remove the end cap from the amplifi er
where the power connections are located.
2. Strip 1/2 inch of insulation off each end of the
power cables used.
3. Install an in-line fuse holder 18 inches away from
the car battery.
4. Connect the Battery terminal to the in-line fuse
using a short power cable.
5. Route another power cable from the in-line
fuse to the amplifi er’s power terminal (or a power
capacitor such as
VM Audio SRCAP2.0
).
6. Connect the power cable to the in-line fuse
and the other end to the amplifi er’s po12V
power terminal (or capacitor’s positive
+
terminal).
7. Re-install the end cap to the amplifi er.
Power
Battery
Terminal
In-Line
Fuse
Capacitor
Power
Terminal
D
isconnect the negative (-) battery terminal
before routing wires to prevent electrical shorts.
VM Audio SRPK8R power kit
recommended
