1. Strip 1/2 inch of insulation off each end of the
power cables used.
2. Install an in-line fuse holder 18 inches away from
the car battery.
3. Connect the Battery terminal to the in-line fuse
using a short power cable.
4. Route another power cable from the in-line
fuse to the amplifier’s power terminal (or a power
capacitor such as
VM Audio SRCAP3.0
).
5. Connect the power cable to the in-line fuse
and the other end to the amplifier’s po12V
power terminal (or capacitor’s positive
+
terminal).
6. Re-install the end cap to the amplifier.
Power
Battery
Terminal
In-Line
Fuse
Capacitor
Power
Terminal
VM Audio SRS44B power kit
recommended
D
isconnect the negative (-) battery terminal
before routing wires to prevent electrical shorts.
POWER CONNECTIONS continued...
9
